Intex CS8110 Manuel d'utilisateur télécharger pdf (Page 9)

(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013

131

SAVE THESE INSTRUCTIONS

English

Page 9

SETUP INSTRUCTIONS (continued)

Connecting the system to pump and pool with 1-1/2” (38mm) connections/hoses:

Pump and pool with 1-1/2” (38mm) connections do not require the adaptors A (1) or B (9).

Install as follows:

Drawing #2

1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,

close the plunger valves before installing the Saltwater System.

2. Disconnect the water return hose from the filter pump connection and connect it to the

Saltwater System outlet.

3. Connect the connector hose (8) to the filter pump outlet connection.

4. Open the plunger valves to allow the water to flow.

FILTER

PUMP

ID 1-1/2” (38mm)

HOSE

ID 1-1/2” (38mm)

HOSE

SALTWATER

SYSTEM

SWIMMING POOL

WATER TO

POOL

PLUNGER

VALVE

WATER FROM

POOL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 26 27

Pas de commentaire

Intex CS8110 Manuel d'utilisateur Page 9